Skip to main content
Start

Get started with AI Governance

Get started is the guided set-up of AI Governance. It is a seven-step page. You can use AI Governance for your own company, and for your clients and prospects. The page asks where your staff are,…

Written By Christopher Scaminaci

Last updated 4 days ago

Get started is the guided set-up of AI Governance. It is a seven-step page. You can use AI Governance for your own company, and for your clients and prospects. The page asks where your staff are, offers a first scan, asks what you want to govern, shows you the ways to see that AI use, lets you check that each one works, and starts you in monitor mode so nothing alerts or blocks until you say so. It takes about 15 minutes. Every step can wait, and nothing is switched on without you.

At a glance

  • What it does: walks you from nothing to your first real AI-use numbers.
  • Plan: every plan. The page shows the plan each way needs and the price, read from Billing. On Free, the rule pack part is skipped.
  • Who: a governance administrator. The account owner holds that role already.
  • Where: AI Governance → Overview → Get started. The Overview, the first-run screen and the AI Governance card on the Dashboard all link to it.
  • Where you see the result: Overview, Data sources → Status and Activity → Activity explorer.

Before you start

  1. Sign in with single sign-on or a second factor. Every role except the staff view needs a sign-in through your organization's single sign-on, or a sign-in that used a second factor. If you sign in with a password, add an authenticator app or a passkey in your sign-in account first. Then select Sign in again.
  2. Know where your staff are. The first real question is a legal one. See step 2.
  3. Have a way into the AI you want to see. For a vendor, that is an admin key. For Microsoft 365, it is a Global Administrator or Privileged Role Administrator. For a coding tool, it is a place to put a token. Choose how to see AI use lists them all.

Open it for the first time

The first time an administrator opens AI Governance, and every time after the owner closed it, the page says: "AI Governance is not set up for . Setting it up creates an empty organization record. Nothing is collected until you add a source." Under it are three lines about the product:

  • It shows which AI tools your staff use, and how much.
  • It checks what is sent to AI tools for secrets and personal data (Pro and above), and alerts you.
  • It keeps the evidence an auditor, an insurer or a client asks for.

The card also says "Your plan: " and "About 15 minutes to set up." The button reads Set up AI Governance. Opening a page never sets it up by itself, so nothing is created until an administrator presses the button. A person without an administrator role sees "Your administrator has not set up AI Governance yet."

After you press it, the Overview shows a welcome card with a link to Get started.

How the page works

  • A rail on the left lists the seven steps. Each one shows Done, Now, Later or Needs plan. Now is the first step that is still open.
  • Back and Next move one step. You can select any step in the rail.
  • The header shows your plan.
  • A link can open a step directly, for example from an email or from this help center.
  • You can leave and come back. What you saved stays saved.

The seven steps

1. Welcome

One picture of how AI Governance works: Sources (where AI use is recorded: a vendor report, a browser, a computer) lead to Facts (one line per use), then Rules (checks for secrets and personal data, Pro and above), Findings (a rule hit you review and close), Alerts (a message to the place you choose) and Evidence (reports for an auditor, an insurer or a client). See What AI Governance does.

Three lines about privacy:

  • StackJack records facts by default: which tool, when and how much. It does not keep what people typed.
  • It stores the text of a prompt only if you turn that on, and only on a paid plan.
  • For staff in the EU and the UK, names are hidden by default.

2. Your staff and your notice

Two answers decide what StackJack may collect. Where your staff are sets the default rules for names and keep times. The staff notice is the proof that you told your staff.

ChoiceNamesText is keptCollection waits for a staff notice
European Union or United KingdomPseudonymous30 daysYes
United StatesVisible to administrators90 daysNo. Recording one is recommended.
Somewhere elseLike the United States90 daysNo

Record the date staff were told, how, the policy version and, if a works council applies, its agreement. For an EU or UK organization this is a gate: StackJack collects nothing until it is done. The step also offers wording for the notice. Under Need wording for the notice?, the page shows the template that fits your jurisdiction, with a Copy text button. Copy the text, fill in the parts in double braces, and send it to your staff. Then record that you did it. The templates carry a draft banner until StackJack's legal review approves them. You can change all of this later. See Privacy, notices and retention settings.

3. First scan

See what is already there. Sign in to Microsoft once, read only, with nothing to install. You get an exposure score and a report you can hand over. The step shows the same scan panel as your organization's own page, on your own organization, whichever organization you have selected.

  • The step is done when your own organization has a scan.
  • If you scan a prospect instead, open Prospects from the link on the step.
  • If you are not on Microsoft 365, skip it. It never blocks a later step, and after you save your goals the page stops sending you back to it.
  • If your plan or the set-up refuses a scan, the panel says why and the step stays open.

See AI exposure scan.

4. What you want to govern

Pick the goals that fit. You can pick several, and change them later. Each goal adds the ways to see it:

GoalWhat it adds
Find AI we do not know aboutMicrosoft 365 Copilot; security products you already run; the browser extension
ChatGPT, Claude or Gemini business accountsVendor admin keys; Google Gemini activity and Vault
Microsoft 365 CopilotMicrosoft 365 Copilot
AI in our cloudAzure AI Foundry, Vertex AI and AWS Bedrock
Claude Code and other coding toolsCoding tools; a telemetry source; Claude hooks
AI websites in the browserThe browser extension
Everything on staff laptopsThe endpoint agent (Windows)
Staff using our own AI keysThe AI gateway
Third-party MCP serversThe MCP proxy
What our security tools already seeSecurity products you already run
StackJack automationsStackJack automation runs

Under the goals, The sources for what you picked lists the ways, easiest first: no install first, then by the minutes it takes. It is a tick list. Each way is a source, with a tick box beside its card. The card shows:

  • what it sees,
  • what it collects (facts, or text too),
  • whether it needs an install (No install, or Yes, on staff computers or browsers),
  • about how many minutes it takes to set up,
  • You will see it in: the pages where its data shows,
  • Plan: "Works on every plan", "Needs Pro" with the monthly price, or "Included in your plan". The price is read from Billing. A way above your plan stays on the page and you can still choose it, so you can buy the plan on the way.

Each goal ticks the sources that show it. Untick any source you do not use.

  • A ticked source counts as used. It counts toward your setup, and the Connect step stays open until it works. A source above your plan never holds the step open.
  • An unticked source is not counted. Nothing is decided about it, so StackJack can still suggest it, and you can add it later.
  • A source that is already set up stays in use when you untick it. To stop counting it, select Not using this in the Connect step.
  • A source you marked as not used shows unticked. Tick it to use it again.

If your organization saved its goals before, a suggested source that nobody connected and nobody ticked shows unticked. Saving the step again does not make it hold the setup open.

Select Save and continue. Your goals and your ticks are saved for the organization. If you untick a goal, the sources that only that goal ticked lose their tick with it.

5. Connect

One card for each source you use, easiest first, then one for each source your goals suggest and nobody decided on. A source you marked as not used has no card. Each card has the exact steps, a state, and these controls:

  • Open opens that way's own page. The browser extension and the endpoint agent say Deploy and open Staff computers → Deploy, and their cards also have the link See which computers report, which opens Coverage. The page opens in wizard mode and shows a Back to Get started bar.
  • Check now asks StackJack whether the way works. See Data sources for what the four states mean. The card shows Working with what arrived, for example the number of events in the last 7 days, Waiting for data with how long first data usually takes, Needs attention with the problem, or Not connected. A card that says Working folds to one line, with Open.
  • On the telemetry card, Create a source opens the new-source dialog in place. See Send telemetry from coding tools.
  • Not using this marks the source as not used. Its card leaves the step, StackJack stops asking you to connect it, and it stops counting toward your setup. For a source that has something set up, a dialog asks first: "Mark this source as not used?" Marking a source changes what is counted. It does not switch a source off, and it deletes nothing. You bring the source back on the Data sources page, with Use it again.

The step is done when at least one source you use works, and every source you use works. It then says "Every source you use is working. A source you have not connected does not hold this step open." That holds for a source your goals suggest that you did not tick and did not connect. A source you ticked in step 4 holds the step open until it works, or until you mark it as not used.

When you save on a way's own page, the bar changes to "Saved. Go back to Get started to check that it works." with a button. It offers the way back. It never moves you. This works on the pages for sources, the AI gateway, the MCP proxy, coding tools, the browser extension, Claude hooks, Cloud AI and Microsoft 365. It does not yet work on Alerts → Alert settings and on Rule packs.

6. Watch first

This step starts you in monitor mode.

  • Rule packs in monitor mode. The recommended rule packs record what they find and take no action until you make a pack Live. Select Turn on in Test mode. Rule packs need Pro. On Free, the step says what packs add and the price, and is skipped. See Rule packs, modes and custom rules.
  • The monitor line. When you turn the packs on, StackJack stores the start day. A line reads "Monitor mode since , days. The packs alert only after you make one Live." It shows on this step, on the Overview health strip and on the Rules page. It goes away when a rule of an enabled pack is made Live, or when no rule is left in Test mode (a pack turned off, or every rule set to Off). Turning a pack on in Test mode again starts a new count.
  • One place for alerts. The step lists the alert channels your plan has: Email on Free; Teams, Slack, a PSA ticket and a webhook on Pro; the SIEM channels on Business. The link on the step opens Alerts → Alert settings. A new organization already has an email channel. See Alert channels, policies, quiet hours and digests.

7. Results and what next

As soon as one of your sources works, the step shows the first real numbers. Each opens the page that explains it:

NumberOpens
AI tools foundAI inventory → Inventory
AI vendors seen (30 days)Activity → Spend
AI calls (30 days)Activity → Activity explorer
People using AI (30 days, a count only)People → Staff

Before data arrives, the step says what will appear and how long it usually takes, for example "about an hour". If something you connected needs a look, the step says so and points you to Data sources.

Under them are the two headline numbers of the Data sources page, which say how much of your AI use StackJack can see:

  • Sources you use: how many of the sources you use work, for example "4 of 5 working". While you use no source, it reads "No source is connected yet".
  • Where you can see AI use: how many of the places where AI use can happen are covered, for example "1 of 5 places covered".

A number that could not be read says "Could not be read". It is never shown as a zero. Open Data sources opens the page, where you see each place and close the gaps. See Data sources.

Under these are the three most useful things that are not on yet, picked from what you have set up. Each has one line of why and a link. Examples are turning on the recommended rule packs in Test mode, choosing where alerts go, turning a pack to Live after two weeks in monitor mode, reviewing the AI tools found, adding your first client and scanning a prospect (both on Pro and above), publishing an AI use policy, giving staff the training lessons, checking your readiness and making a report pack.

Select Finish to mark Get started as done. Steps still to do stay on the page, and you can come back to any of them.

After you finish, the Overview shows a What next card with the same picks and a link to Open Get started. Select Dismiss to remove it.

The AI Governance card on the Dashboard

On the app-wide Dashboard, a card shows your plan, your set-up progress, a health chip and the number of open findings, with a link in. It draws only where AI Governance is available to your organization.

Check that it works

  1. Open AI Governance → Data sources → Status. Each way shows its state.
  2. Select Check now on the ones you set up.
  3. Open Activity → Activity explorer. The first facts appear here after the sender runs. Vendor sources read on a schedule, so their first figures can take a few minutes, and the card says how long.

If nothing arrives, see Troubleshooting and FAQ, by symptom.

Other messages at the door

You can also be told one of these when you open AI Governance:

  • AI Governance is not available for your organization.
  • AI Governance is not set up for your account yet. If someone invited you as an auditor or adviser, open the link in your invitation email.
  • You do not have access to this page.
  • AI Governance is not available here.

After Get started