Data sources
Data sources is the group of the AI Governance menu where you set up every way StackJack can see AI use. Its first entry, Status, opens the page Data sources. The page shows the sources you use and…
Written By Christopher Scaminaci
Last updated 4 days ago
Data sources is the group of the AI Governance menu where you set up every way StackJack can see AI use. Its first entry, Status, opens the page Data sources. The page shows the sources you use and whether each one works, the places where AI use can happen and whether a source covers each one, and the one next thing to do. You connect the sources you use and mark the rest as not used. Then the page tells you where AI use can still go unseen.
At a glance
- What it does: shows the sources you use and how many work, the six places where AI use can happen, the gaps, and what to do next.
- Plan: every plan can open the page. Some sources need a higher plan, and the row says which.
- Who: an Administrator or an Auditor. Only an Administrator connects a source, marks one as not used, or decides about a place.
- Where: AI Governance → Data sources → Status.
- Where you see the data: Activity → Activity explorer, Activity → Spend and AI inventory.
What is in the group
The group has four entries, by what you have to do:
The old addresses of all these pages still open the same pages.
The top of the page
Two blocks sit side by side.
- Sources you use says how many of the sources you use work, for example "4 of 5 working". A small bar shows one mark for each of them. A source counts as used when you connected it, when you chose it in Get started, or when it already sends data. A source you marked as not used does not count.
- Where you can see AI use says how many places are covered, for example "1 of 5 places covered", with how many are partly covered and how many are gaps.
Under them, one card says the next thing to do. A source you use that needs attention comes first. After that, the card names the first open gap and the one source that closes it. When every source you use works, the card says so. For an Auditor the card reads as an Administrator's job: "Next for an administrator", with no button.
Check all now in the page head reads every source again.
If a number could not be read, the page says "Could not be read". It never shows a zero that nobody counted.
The six places
AI use can happen in six places. Each one is a cell on the page, with its state:
Company AI accounts is judged for the vendors you use. A vendor source that nobody decided on is a suggestion in the list of sources, not a gap, because StackJack cannot know which vendors you pay for.
Gaps to close
The panel Gaps to close has one row for each open gap and each place that is partly covered. A row says:
- Why it is open, in one sentence. For example: "Nothing watches the AI apps on your computers."
- What closes it: the one source that closes the gap, how long it takes to set up, and whether your plan includes it. The easiest source comes first. If only a higher plan closes the gap, the row names the plan and links to See Billing.
- One button that opens the page where you set that source up.
An Administrator can also decide about the place:
- Does not apply to us, on a Gap, opens a dialog with two answers. It does not apply to us leaves the place out of the count. We accept this gap keeps the place on the page as a gap you accepted.
- This is enough for us, on a place that is partly covered, accepts it as it is.
- Change this, on a place you decided about, takes the decision back.
A decision about a place changes what the page counts. It switches nothing off, and the sources stay as they were.
Your sources
The panel Your sources lists every way StackJack can see AI use, in three groups: Connected accounts (no install), Staff computers (install once, then see which computers report) and AI traffic (send AI calls through StackJack). Each row shows:
- the name of the source and what it sees,
- a state,
- which places it covers. A source that covers no place says "Counts toward Activity only",
- a line of evidence when the source is waiting or needs attention, or after you check it. For example: "Waiting for first data (this usually takes about an hour).",
- a problem line and what to do, when the state is Needs attention,
- one action: Connect, Deploy or Set up for a source that is not connected, Open for one that is, Fix for one that needs attention,
- Check now, which reads that source again. For a source that works, it also counts the events of the last 7 days.
A source above your plan shows Needs Pro or Needs Business and See Billing. If a page is only for an Administrator, an Auditor sees "An administrator opens this page." in place of the link.
Mark a source as not used
If you do not use a source, an Administrator selects Not using this on its row. StackJack then stops asking you to connect it, and it stops counting toward your setup. The row moves to the group Not used at the end of the list. Use it again brings it back. Right after you mark a source, the line "Marked as not used." has an Undo.
Marking a source as not used changes what the page counts. It does not switch a source off, it deletes nothing, and it mutes no alert. If a source you marked still sends data, its row says "Marked not used, and still sending data. Switch it off, or use it again."
The states of a source
Needs attention has these causes:
- every source of the kind is switched off,
- the vendor key of a source passed the day you entered for it,
- no new data has arrived for more than 7 days,
- a scheduled read failed several times in a row,
- the Microsoft 365 consent was removed in Microsoft.
A few sources have their own rule:
- Microsoft 365 is Waiting for data when it is connected but has no Copilot source yet, or while the consent is pending.
- Coding tools is Working when Claude Code on a staff computer reports that it runs the settings StackJack made. If telemetry arrives but no computer reports the settings, the state is Waiting for data.
- Browser extension is Waiting for data with the number of browsers that have checked in, until the first AI website event.
If a read fails, the row says "Could not be read" and changes nothing else.
The ways and what each needs
The ways are the same ones the Get started page shows. The times are guides, from the shared catalog. First data can arrive later.
For StackJack automation runs, StackJack creates the source for you (the row says "Made for you"). The row tells you whether it works. See StackJack's own AI use in AI Governance.
Choose how to see AI use says what each one sees and collects.
Help on every page of this group
- A plan line under the title says what the entry does on your plan and what a higher plan adds, with the price. It does not show when no higher plan adds anything.
- A line under the title says Shows in: and Fills from:, with links to the pages that show the results and the set-up pages that feed this page. About this page opens what the page does and what you will see.
- A tour button on the Data sources page walks you through it.
- The help button opens the help page for the page you are on.
Troubleshooting
More help is in Troubleshooting and FAQ, by symptom.
Next
Was this helpful?
More in Connect your AI
Settings for staff machinesDelivering the settings through your RMMRead your AI vendors' admin accountsMicrosoft 365 Copilot and AzureStill need help? Ask the team