Deploy and manage: put AI in place at a client and keep it as agreed
Deploy and manage lets you write down how AI must be set up for a client, put that set-up in place, and keep it that way. You write the set-up one time, as a standard. StackJack reads the client,…
Written By Christopher Scaminaci
Last updated 4 days ago
Deploy and manage lets you write down how AI must be set up for a client, put that set-up in place, and keep it that way. You write the set-up one time, as a standard. StackJack reads the client, shows you what the standard would change, and makes the changes only after the right person approves them. Later, StackJack tells you when a setting moves away from the standard, and it can put the setting back.
At a glance
- What it does: applies a standard to a client with your approval, keeps the client on the standard, watches seats and their cost, and buys seats through a distributor.
- Plan: Pro and above.
- Who: an Administrator of your whole organization writes the standards, the approval rules and the Microsoft partner app. Other people work on the clients their role is given access to.
- Where: AI Governance → Deploy and manage. It has nine tabs, and Clients and standards is the first.
- Needs: a connection for each platform on the Connectors page. For Microsoft, it also needs the Microsoft partner app. See The Microsoft partner app and its health.
Nothing is changed by itself the first time. A standard that you add to a client changes nothing. A plan changes nothing. StackJack makes a change only after a person (or a rule that a person wrote) approves it.
Every client on one screen
The first tab, Clients and standards, shows every client you may see on one screen. Each client is a row. Each standard is a column. A cell shows a bar and how many of the standard's settings match, such as 12 of 14, and one state word:
- Matches. Every setting StackJack read equals the standard, or a person accepted the difference.
- Drifting (2). Two settings differ and nobody accepted the difference.
- Needs setup. StackJack could not read any setting of the standard at that client. Check the connection and its permissions.
- Not checked yet. The client has the standard and no check has run.
- Not added. The client does not have the standard.
The rows with the most to look at come first. With more than six standards, the matrix shows one Standards column for each client. Filter by Drifting, Not added or Enforcement off, or search by name. Select a cell to open that client's drift.
The tiles above the matrix count the clients that have a standard, the clients that fully match, the clients that drift, and the changes that wait for you. They show once your first client has a standard; until then the foot of the clients panel says: "The numbers and the drift that repeats at several clients show here after your first client has a standard." With no standard in your library yet, each client is listed with Not added, and Nothing to check under the last check.
Add a standard on the row of a client with no standard opens Deploy for that client. It is for Administrators. While no standard is published it is off, and its tooltip says "Opens after step 4 of the setup".
Plan a standard at several clients. Tick the rows, select Plan a standard at N clients at the top of the page, and choose the standard. While nothing is ticked, the line beside the button says "Select clients in the table first." StackJack makes one plan for each client, and the page lists the plans together. If a client does not have the standard yet, you can add it first at the clients that lack it. Adding changes nothing at the client. With enforcement on for that standard, StackJack then also watches the client.
The same drift at several clients. This panel shows only when a setting differs at two or more clients. Such a setting is one line, such as "Web search in Copilot differs at 4 clients", with Fix at all 4. That asks StackJack to plan the fix at each of them.
At most 25 clients go in one batch. A longer list is refused, and nothing is requested. A batch only asks StackJack to read each client and make a plan. It never sends a plan for approval and never changes a client. You open each plan, send it for approval, and your approval rules decide each step, exactly as for one plan.
Set up deploy and manage
Before the first plan, an Administrator of your whole organization sees the setup, Set up deploy and manage, at the top of Clients and standards, Drift and Deploy. Its five steps sit on one line: the Microsoft partner app, the service account, the clients that consented, a published standard, and a standard at a client. A done step says Done. One card under the line holds the step to do now, such as "Step 1: Create the Microsoft partner app": where it stands, why it is needed, and its one button. Each later step waits and says "Opens after step N". The setup goes away when all five are done. See The Microsoft partner app and its health.
How it works, in six steps
- Write a standard. Choose the settings and their values. See Standards.
- Add the standard to a client. This only records that the client should follow it.
- Plan. StackJack reads the client and shows the current value and the new value of each setting, what is missing before it can start, and the cost of any purchase. See Deploy a standard to a client.
- Send the plan for approval. Your approval rules decide who approves each step. See Approvals and automatic changes.
- StackJack makes the changes. It reads each value back to check it. The page shows the result of each step in plain words.
- Keep the proof. A finished run gives a document for the client: what each step asked for, what StackJack found, who approved it and when.
The tabs
The pages work on the client you chose in the client picker, except Clients and standards and Changes, which show every client you may see. The Standards, Approval rules and Microsoft partner app tabs belong to your whole organization, so they do not change with the client.
Who can do what
- An Administrator of your whole organization can do everything, at every client.
- A Reviewer, Reveal approver or Auditor of your whole organization can look, and cannot change anything.
- A person whose role is limited to one client can do only what an administrator gave that role. The choices are View only, Request changes, Apply changes and Approve changes up to a limit. They can never raise their own limit, and they can never reach another client. See Approvals and automatic changes.
- A change that needs a typed phrase also needs a sign-in that used a second factor. The page tells you when your sign-in has none and links to sign in again.
When a page says it cannot start
A banner at the top of a page says why. These are the four reasons:
- Not switched on yet. Deploy and manage is a platform setting that StackJack support turns on for your region. Contact support.
- The plan is below Pro. Open Settings → Billing to see the plans.
- AI Governance is not available for your organization right now. Check that it is set up and that the plan is active.
- A connection is missing or cannot read the client. The plan names the platform and what to fix.
What StackJack never does by itself
- It never buys seats by itself unless you wrote a rule with limits, and a tripped safety stop sends every purchase back to a person.
- It never fixes a drifted seat or purchase by itself. A person plans those.
- It never shows a list of people from a client's settings. A setting's value is shown in words, and a setting that holds people or groups shows a count, such as "3 people" or "2 groups". An id is never shown.
- The record of an automatic approval names the rule or the automation that approved it, not a person.
Use it from your AI
Every page above has matching tools, so you can ask your AI to read every client and where each standard stands, list standards, plan a run (at one client or several), put one setting back, read what waits, and, with the right role and phrase, decide it. The tools are in Use AI Governance from your AI.
Was this helpful?
More in For MSPs
All clientsClient organizationsClient administrators and auditorsSources for a client organizationStill need help? Ask the team